Editing Your Wireless Profile after a Password Change

Getting on Wireless (Wesstudent or Wesfacstaff) after Password Change

Mac Guide

1. Determine what version of OS X you are running by clicking on the Apple in the top left corner and choosing About This Mac.

2. If it says 10.7, 10.8 or 10.9 under Version, follow steps 3-6. If it says 10.6 or below follow steps 7-11.

For Mac OS X Lion, Mountain Lion and Mavericks (10.7, 10.8 and 10.9)

3. Click on Wireless and select Open Network Preferences at the bottom of the pull down menu.

4. Click Turn Wi-Fi Off, then click on Advanced

5. Click on Wi-Fi and under Preferred Networks locate Wesstudent (or Wesfacstaff) . Then click the minus button next to it and hit OK.

6. Turn Wi-Fi back on, and select Wesstudent (or Wesfacstafff). You will be prompted for username and password. This is where you can enter your Wesleyan Username and new password. You should now be connected!

For Mac OS X Snow Leopard (10.6)

7. If you are running 10.6, click on the wifi icon and select Network Preferences.

8. Click “Turn Airport Off” then click on Advanced.

9. Under Airport, delete Wesstudent (or Wesfacstaff) by selecting the network and pressing the minus symbol, then click on the 802.1X tab.

10. Under 802.1X, delete any profiles on the left side for Wesstudent (or Wesfacstaff) by selecting them and pressing the minus symbol. Then, press the plus symbol and create a new profile. Make sure the settings match the screen below (including EAP-FAST is selected) and click OK.

11. Select Wesstudent or Wesfacstaff to connect to and you will be connected to the network.